IGUANA Kiln with 22" Stand


The Iguana is powered with reliable extra heavy-duty elements. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,800 watts heat the 18” wide, 18” deep, 22 ½” high interior to a full cone 10. Easy Installation and easy to load, with the 22” stand, the interior floor height is a comfortable 34 ½”.
The 240 volt Iguana plugs into a standard 6-50R outlet, so you can fire it on the outlet most studio kilns already use.
Industrial-gauge elements are seated and protected in dropped, recessed firebrick grooves. The elements are easy to replace, because you can comfortably reach into the kiln.
Potters and ceramists who struggle with top-loading kilns will enjoy the Iguana. The door swings open wide on a heavy ½” steel rod with sealed bearings. A spring-loaded latch presses the door tightly closed. A recessed firebrick lip around the door seals in heat.
The Sentry digital controller is manufactured by Orton Ceramic Foundation.

Iguana Furniture Kit (Optional)

3 C-17 full shelves (16” x 14” x 5/8”)

1 C-17H half shelf (8” x 14” x 5/8”)

1” wide square posts, 4 each in lengths of ½”, 1”, 2”, 3”, 4”, 5”, 6”

1 lb. bag kiln wash